Rebar rust removing machine It is an efficient, fast, and low-cost rust removal equipment. It is a device specifically designed to remove rust on the surface of steel bars and has a wide range of applications in engineering fields such as construction, bridges, and roads. YG is a professional manufacturer of steel reinforcement processing equipment. The large-scale production capacity can provide you with low-cost steel bar rust removal machines. Click to get more information!
Rebar Rust Removing Machine Parameters
| Model | YG-32 | YG-51 |
| Working Range | 14-32mm | 48/51mm(without traction wheel)|32-51mm(with traction wheel) |
| Working Speed | 580-600r/min | 580-600r/min |
| Power | 2.2kw*2 (without traction wheel)|3kw*2(with traction wheel) | 3kw*2 |
| Motor | 380V | 380V |
| Weight | 160kg | 220kg |
| Dimensions | 800*500*600mm | 800*500*800mm |
Steel Bar Rust Remover Using Scope
The rebar rust removal machine is mainly used for rust removal of large quantities of steel bars in steel bar dealers and construction sites. In these situations, the steel rust removal machine can greatly improve work efficiency, reduce labor intensity, and ensure the quality and service life of the steel bars.
Rebar Rust Remover Machine Structure and Characteristics
The steel bar rust removal machine is mainly divided into two types: fixed and mobile. They are usually driven by a power device to rotate a disc wire brush or wire wheel at high speed, in order to clean the rust on the steel bars.
The structural features of the rebar rust removing machine include wear-resistant protective plates to protect the room wall panels from wear and extend the service life of the room body. Fully utilize the rebound function of projectiles to improve cleaning quality and efficiency. There is a spacious maintenance door in the cleaning room for easy maintenance and replacement of vulnerable parts inside.
Rebar Rust Cleaning Machine Working Principle
The rust removal principle of the rebar rust-removing machine is mainly to remove rust from the threaded steel passing through the middle quickly by rotating multiple rows of steel wire wheels at high speed from multiple angles. This automatic traction method enables the steel bars to travel at a fast speed, generally reaching 16.5-18.5 meters per minute. During the rust removal process, the entire body of the steel bars will be polished from different coordinate orientations. The oxide scale, rust layer, and dirt on the index steel bars will quickly fall off, restoring a smooth surface.
5 Advantages of Steel Bar Rust Derusting Machine
- 1. Fast rust removal speed: The rebar rust removal machine can efficiently and quickly remove rust on the surface of steel bars.
- 2. Good effect: thorough rust removal can restore the original luster of the steel bars.
- 3. Low cost: Compared to manual rust removal, the operating cost of a steel bar rust removal machine is lower.
- 4. Multifunctionality: While rust removal, it can also eliminate burrs and debris on the surface of steel bars, which has a certain beautifying effect on the surface.
- 5. High controllability: The rebar rust removal machine is particularly suitable for rust removal work on large steel plates, steel bars, and steel structures, and is suitable for large-scale, severe rust removal and rust removal of steel bars with fasteners.
How do You Use a Rebar Rust Cleaning Machine?
The usage method of rebar rust removing machine is relatively simple, mainly including the following steps:
- 1. Place the machine on a sturdy and flat horizontal surface, and secure the material rack.
- 2. Adjust the transmission device of the inlet and outlet to the center of the shaft tie according to the diameter of the steel bars, so that the steel bars can enter and exit freely.
- 3. Adjust the steel brush wheel to be 5-8mm smaller than the diameter of the steel bar raw material, and make the steel wheel symmetrical.
- 4. Stack the steel bars neatly on the side of the feeding port and clean the area around the side of the discharging port.
- 5. Connect the motor power supply and ensure that the motor rotates according to the marked arrow and synchronizes with the feeding port.
- 6. After starting up, materials can be fed and normal construction can begin
Rebar Rust Removing Machine Price from YG
We not only produce rebar rust removing machines, but also rebar straightening and cutting machines, rebar upsetting machines, rebar rolling machines, rebar cutting machines, and rebar bending machines. Complete steel reinforcement processing equipment helps customers solve various problems related to steel reinforcement processing. We will also recommend suitable steel reinforcement solutions based on the specific needs of our customers. Up to now, our steel processing equipment has been sold to many countries. Looking forward to working with you! If you have any needs, please contact us!
