Polyurea machine

Polyurea machine is a kind of highly efficient and environmentally friendly coating equipment. It adopts two-component material high temperature heating, high pressure mixing, and then spraying. The equipment mainly consists of material supply devices, spray guns, atomization generators, and other components. The equipment has the characteristics of easy construction, flexible operation, and superior material performance. We usually use polyurea sprayers in many fields such as industrial maintenance, roadbed waterproofing, pipeline anticorrosion, and so on. Click the button below for YG to offer affordable polyurea sprayer prices!

Parameters of Polyurea Machine

Model	YG-25	YG-30	YG-28	YG-36
Power	three-phase 380V 50Hz	three-phase380V 50Hz	three-phase 380V 50Hz	three-phase   380V 50Hz
Heating power	9.5KW	18KW	15KW	22KW
Driven mode	pneumatic	pneumatic	pneumatic	hydraulic
Air source	0.5~0.8MPa≥ 0.9m3/minute	0.5~0.8MPa≥ 1.2m3/minute	0.5~1 MPa≥ 1m3/minute	0.5~0.8MPa≥ 0.5m3/minute
Material output	2-10kg/minute	2-10kg/minute	2-10kg/minute	2-12kg/minute
Max pressure	25Mpa	30Mpa	28Mpa	36Mpa
AB ratio	1:1	1:1	1:1	1:1

The Use of a Polyurea Sprayer

Polyurea machine can be used for road embankment waterproofing, pipeline corrosion, auxiliary cofferdam, storage tanks, pipeline coating, cement layer protection, wastewater treatment, roofing, basement waterproofing, industrial maintenance, wear-resistant lining, cold storage heat preservation, wall heat preservation and so on.
We can also use it in industrial maintenance, wear-resistant lining, exterior wall insulation, audio, automobile, workshop floors, bridges, high-speed railroad, subway, handicrafts, sports, and other fields. In addition, the polyurea sprayer is also suitable for spraying a variety of two-component materials, such as polyurethane elastomer, and polyurethane foam materials.

Why Choose to Use a Polyurea Coating Machine?

1. The machine has a stable cylinder pressurizing unit, which easily provides enough working pressure.
2. The whole machine is small in size, light in weight, low in failure rate, simple in operation, and easy to move.
3. The polyurea spray machine uses the most advanced ventilation to maximize the stability of the equipment work.
4. The equipment has a multi-leakage protection system to protect the operator’s safety.
5. The machine also has an emergency switch system to help operators deal with emergencies quickly.
6. The digital counting system can keep abreast of the original consumption.
7. A reliable and powerful 380V or 220V heating system allows the raw material to be heated up quickly to the optimum condition. And it can work well in cold conditions.
8. The equipment has a humanized design of the operating panel, super easy to use and master.
9. The feed pump adopts a large variable ratio method. So it is easy to feed high-viscosity raw materials even in winter.

How to Use the Polyurea Sprayer Machine Correctly?

1. First, check the parts of the machine that are easy to leak. The main inspection sites are: liquid level meter, oil drain plug, oil pump, shaft drive and oil motor shell combined surface, cylinder cover combined surface, cylinder piston rod extension, hydraulic valve combined surface, adjusting handle extension, oil pipe joints, and oil cylinder.
2. Check the safety valve of the polyurea sprayer and steel pipe. And hose of the hydraulic system, pipe fittings, and oil cylinder. to check for friction damage and cracked lines.
3. Check the piping from the safety valve to the cylinder inlet to ensure that there is no deformation caused by impact and friction damage. Ensure that fittings are intact and fastened.
4. The lubricating grease of the polyurea coating machine should be sufficient and kept clean at all times. And there should be no overflow from the lubricating pipe joints.
5. Check the lubrication of each running part at any time. Assuming that there is a lack of oil should immediately stop the machine to check, to prevent accidents.

Polyurea Machine for Sale from YG

YG has a strong production capacity to meet the needs of large-scale orders. YG’s polyurethane machines are highly efficient, stable, and durable, and are popular among domestic and foreign customers. What’s more, YG provides factory prices directly, with no middleman to make the price difference, you can buy the polyurea coating machine at high quality and low price. We also provide wall plaster spray machines, GRC spraying machines, polyurethane spraying machines, wall plastering machines, mortar spraying machines, concrete pumps, curb sliding molding machines, and so on.